Pd on poly(1-vinylimidazole) decorated magnetic S-doped grafitic carbon nitride: an efficient catalyst for catalytic reduction of organic dyes.

A novel magnetic catalyst, (SGCN/Fe3O4/PVIs/Pd) was synthesized by growing of poly(1-vinylimidazole) on the surface of ionic liquid decorated magnetic S-doped graphitic carbon nitride, followed by stabilization of palladium nanoparticles. Catalytic activity of the prepared heterogeneous catalyst was explored for the catalytic reduction of hazardous dyes, methyl orange and Rhodamine B, in the presence of NaBH4. Besides, the effects of the reaction variables on the catalytic activity were investigated in detail. The kinetics study established that dye reduction was the first order reaction and the apparent activation energy was calculated to be 72.63 kJ/mol and 68.35 kJ/mol1 for methyl orange and Rhodamine B dyes, respectively. Moreover, ΔS# and ΔH# values for methyl orange were found to be - 33.67 J/mol K and 68.39 kJ/mol respectively. These values for Rhodamine B were - 45.62 J/mol K and 65.92 kJ/mol. The recycling test verified that the catalyst possessed good stability and reusability, thereby making it a good candidate for the catalytic purposes. Furthermore, a possible catalytic mechanism for dye catalytic reduction over SGCN/Fe3O4/PVIs/Pd was proposed.

Ag Nanoparticles Stabilized on Cyclodextrin Polymer Decorated with Multi-Nitrogen Atom Containing Polymer: An Efficient Catalyst for the Synthesis of Xanthenes.

In attempt to broaden the use of cyclodextrin polymer for catalytic purposes, a novel covalent hybrid system was prepared through growth of multi-nitrogen atom containing polymer (PMelamine) derived from reaction of ethylenediamine and 2,4,6-trichloro-1,3,5-triazine on the functionalized cyclodextrin polymer (CDNS). The resulting hybrid system was then utilized as a catalyst support for the immobilization of silver nanoparticles through using Cuscuta epithymum extract as a naturally-derived reducing agent. The catalytic activity of the catalyst, Ag@CDNS-N/PMelamine, for the synthesis of xanthenes through reaction of aldehydes and dimedone in aqueous media was examined. The results showed high catalytic activity and recyclability of the catalyst. It was believed that cyclodextrin in the backbone of the catalyst could act both as a capping agent for Ag nanoparticles and phase transfer agent to bring the hydrophobic substrates in the vicinity of the catalytic active sites and accelerate the reaction rate. Multi-nitrogen atoms on the polymer, on the other hand, could improve the Ag NPs anchoring and suppress their leaching.

Optimization of Bi2O3, TiO2, and Sb2O3 doped ZnO-based low-voltage varistor ceramic to maximize nonlinear electrical properties.

In ZnO-based low voltage varistor, the two essential features of microstructure determining its nonlinear response are the formation Bi-enriched active grain boundaries as well as a controlled ZnO grain size by secondary spinel-type phases. Besides, the microstructure and phase composition are strongly affected by the dopant concentration during sintering process. In this study, the optimal dopant levels of Bi2O3, TiO2, and Sb2O3 to achieve maximized nonlinear electrical property (alpha) were quantified by the response surface methodology (RSM). RSM was also used to understand the significance and interaction of the factors affecting the response. Variables were determined as the molar ratio of Bi2O3, TiO2, and Sb2O3. The alpha was chosen as response in the study. The 5-level-3-factor central composite design, with 20 runs, was used to conduct the experiments by ball milling method. A quadratic model was established as a functional relationship between three independent variables and alpha. According to the results, the optimum values of Bi2O3, TiO2, and Sb2O3 were obtained 0.52, 0.50, and 0.30, respectively. Under optimal conditions the predicted alpha (9.47) was calculated using optimal coded values from the model and the theoretical value is in good agreement with the value (9.43) obtained by confirmation experiment.

Optimizing Bi2O3 and TiO2 to achieve the maximum non-linear electrical property of ZnO low voltage varistor.

BACKGROUND: In fabrication of ZnO-based low voltage varistor, Bi2O3 and TiO2 have been used as former and grain growth enhancer factors respectively. Therefore, the molar ratio of the factors is quit important in the fabrication. In this paper, modeling and optimization of Bi2O3 and TiO2 was carried out by response surface methodology to achieve maximized electrical properties. The fabrication was planned by central composite design using two variables and one response. To obtain actual responses, the design was performed in laboratory by the conventional methods of ceramics fabrication. The actual responses were fitted into a valid second order algebraic polynomial equation. Then the quadratic model was suggested by response surface methodology. The model was validated by analysis of variance which provided several evidences such as high F-value (153.6), very low P-value (<0.0001), adjusted R-squared (0.985) and predicted R-squared (0.947). Moreover, the lack of fit was not significant which means the model was significant. RESULTS: The model tracked the optimum of the additives in the design by using three dimension surface plots. In the optimum condition, the molars ratio of Bi2O3 and TiO2 were obtained in a surface area around 1.25 point that maximized the nonlinear coefficient around 20 point. Moreover, the model predicted the optimum amount of the additives in desirable condition. In this case, the condition included minimum standard error (0.35) and maximum nonlinearity (20.03), while molar ratio of Bi2O3 (1.24 mol%) and TiO2 (1.27 mol%) was in range. The condition as a solution was tested by further experiments for confirmation. As the experimental results showed, the obtained value of the non-linearity, 21.6, was quite close to the predicted model. CONCLUSION: Response surface methodology has been successful for modeling and optimizing the additives such as Bi2O3 and TiO2 of ZnO-based low voltage varistor to achieve maximized non-linearity properties.